Height
Performance relating to maximum achievable heights.
-
What is the maximum height that your Partition systems go to?
Partition maximum heights are dependent on several factors. Stud width, stud type, stud gauge and stud centres. The number of board layers and footprint width also effect the maximum height. All these effect the strength and stability of the system and thus the height it can be built to. Larger studs, heavier stud gauge, reduced stud centres and inc
-
What heights can timber stud partitions achieve?
As Siniat is a supplier of metal stud partitions, the design of a timber frame would be down to the guidance supplied by specialists in this area and/or the timber association. Timber frames can be both load bearing and non-load bearing so size and grade of timber will be important.
-
What height can your Independent Wall Lining (IWL) systems achieve?
The Siniat Independant Wall Lining systems maximum height is dependant on a number of factors such as the stud specification (size, gauge and centres) and board layers and type applied to the stud frame. The heights quoted in the Siniat literature for cold state are based upon L/240 which limits the mid height lateral deflection of the specified bu
-
What is the maximum height that can be achieved with Siniat partition systems?
The maximum height possible for a Siniat metal stud partition or shaftwall system is dependant on a number of factors. Firstly there will be the cold state maximum height which is down to the structual ability of the system and keeping it within the defined parameters of BS 5234-2. Secondly, if there is a fire resistance period required for the syst